Nothing much to say, she is a low weight English Longbow (for a Lady?). The stave was a split off from a regular, fumed for 5 days. Only little heat corrections were necessary. Tip are very narrow, tough overlay and arrow pass inlay is green dyed stabilized maple. Handle is hemp cord (with green earthRead more
wood tip overlay
The billets for this bow came from a very old black locust trunk, seasoned + 75 years. The color of that wood is just beautiful like honey, not that more or less olive brown I usually have here. The grain shows up nicely. On the lower limb are two cluster knots, one of them securedRead more
This Black Locust has a nice even crown and a dead flat belly. The tips are flipped with steam and are tapering from the flat belly into a triangular cross section. The outers are stiff. On the back is rawhide, stained with 3 different colors and fading out towards the tips. The rawhide strips areRead more
this bow comes from nice clean stave, which was gentle heat treated and heat corrected. The lower limb has much more reflex than the upper, it was natural grown. This causes a lot of positve tiller. The flips are also made with heat. Backing is red and black dyed rawhide; handle overlay is bloodwood; arrowRead more
This is a very low dense yew, only 6 or 7 rings per inch, grown in my homeland (elevation 365m). Not good for ELBs, so I decided to go for a flattie with statics. The stave was deflex above handle, so I heated in the same amount on the lower fade. On the back areRead more
This bow is made out of billets, which are seasoned over 60 years. When I got my hands on this wood it was a trunk about 40” long and 10” in diameter. It was standing in a dark cellar for all the years. When I touched it the bark fell off like powder – neverRead more
She is a 62” symmetrical bow – handle exact in the geometrical middle. She is heavy heat treated, no stain on the belly! The back is dyed to match with the belly. The outer lines of the limbs are sanded to get the bright stripes. Handle is gentle bending. Overlays are osage, standing rings andRead more
This stave had a natural grown ‚knee‘ nearly in the middle with lots of curly grain (3 knots) in that area, therefore I decided to go for a stiff handle asymmetrical r/d bow with very short fades. The lower limb came out of the knee in a tangential way – I heated in the sameRead more
This is the first of two bows coming from one stave (see here: http://www.primitivearcher.com/smf/index.php/topic,40092.0.html ). This is the main split from the backside of the stave. Chris (blackhawk) and Josh (Gun Doc) gave me the advice to back that wood (it’s only heartwood, no sap) and I did so. In this case it is backedRead more
66,5″ ntn mass: 503grams stiff handle 4″ fade 7″ each width/depth at handle: 22/45 mm at fadeout: 41/17 mm (7″ from handle) at midlimb: 38/15 mm at tip: 12/15 mm gentle heat treated, took about 1,5 “ set, swamp oak overlays, three colour dyed back, string 6 strands 452 X strengthened at the earsRead more