Long time ago I made a 5 curve bow out of a pair of nice, snakey and very old osage sister billets. All curves were steamed in, except the central at the handle which was induced as a backset splice. The greyish brown color was already in the wood. That bow came out a bitRead more
static recurve
I think a wide limbed osage is possible, if it is short enough. Two things have to be saved, the mass and the length of the lever. Saving mass can be achieved by narrowing the outers and short leverage of course by short limbs. So let’s see … I had a nice clean and moreRead more
I have made in the last time same short, wide limbed osage bows and I must say I like them a lot. It was a nice and clean stave, thick enough to get also a belly split – here is the back split. Some adjustments were necessary also some reflex was induced. Fade is 6”Read more
The billets for this bow came from a very old black locust trunk, seasoned + 75 years. The color of that wood is just beautiful like honey, not that more or less olive brown I usually have here. The grain shows up nicely. On the lower limb are two cluster knots, one of them securedRead more
Another fumed static (one week), full of character, laid out as a 5 curve. One limb had this form natural, the other limb got induced curves. Ridges beginning at the handle are tapering out past the fades. The levers got very deep string grooves with sharp ridges. Addy rings on handle and tips allows cuttingRead more
This stick is fumed for 6 days before tillering on the belly, so finally I’ve got a rich colored surface. It is a more flat limbed long faded design, I call it willow leaf (see front sight). In cross section it has a mild concave belly, but is no HLD in origin sense. I hadRead more
Specs: 59” ntn (if I remember right) about 50 – 55#/26” I was invited to the 1. ANNUAL PRIMITIV ARCHER INVITATIONAL. This is plan C of my trade bows, (plan B = bow No.78, plan A = bow No.75). As this bow is thought to hunt with there are no fancy things – it isRead more
Deflexed at handle and long slender hooks with self nocks. The cutting through the back is possible with an additional ring here. I have no access to snake skins or other fancy stuff but I have fish skins brought from a friend from a fishing trip in Denmark. The fish is atlantic cod, it wasRead more
This is the finished bow from the buildalong here This bow is thought to be a hunting bow, and in a take down version. My thoughts about a bushbow are: not too long, dull finish with natural colors or camo, low stress design to allow leaving the bow braced the hunting session long –Read more
Well here is part 2 of the story. This is a bow very similar looking to the first one, only a bit more mass, a lot of heated in reflex, the outers let a bit stiffer – but with a good twenty pounds more of drawweight. After shot in it still holds a nice reflexRead more